STRONG tile adhesive

STRONG is a reinforced cementitious adhesive for laying small and medium-sized ceramic tiles and porcelain tiles. Designed for indoor and outdoor use, it provides increased adhesion, layer stability and reliable tile retention without slippage. Recommended for floors with increased loads and more complex operating conditions.

Scope of application:

• Ceramic tiles;
• Porcelain stoneware (small and medium format);
• Walls and floors;
• Indoor and outdoor work;
• Balconies and loggias;
• Stairs;
• Cement and concrete substrates;
• Cement-sand and cement-lime plasters.

Not recommended for underfloor heating and large-format porcelain stoneware (FLEX and MEGA are designed for this purpose).

Material base:

• High-strength Portland cement;
• Fractionated quartz sand;
• Redispersible polymers;
• Water-regulating and stabilising additives.

Preparation method:

1. Pour the required amount of water into a clean container;
2. Add the STRONG dry mixture;
3. Mix with a mixer at low speed until smooth;
4. Leave for 5 minutes and mix again.

Application method:

1. Apply the adhesive to the substrate with a notched trowel;
2. For floors and exterior work, a combined method is recommended (adhesive on the substrate + a thin layer on the tile);
3. Press the tile firmly and shift it slightly;
4. Adjustments can be made during the open time.

Storage conditions:

• Store in a dry place;
• In undamaged factory packaging;
• Shelf life: 12 months.

Packaging

• 25 kg bags;
• 1 tonne big bags.